• KSV 65BS1

  • KSV 85BS1

  • KSV 120BS1

  • KSV 160V

  • KSV 40V

COMPRISED SERIES

: KSV 40V, KSV 65BS1, KSV 85BS1, KSV 120BS1, KSV 160V-8H


  • APPLICATION

    The valve controls the amount of the air flowing into the Air-End in order that the compressor may operate efficiently during load and unload conditions.

  • PRODUCT CHARACTERISTICS
    • It is to secure and control the air intake by implementing the Butterfly Control Disk and Swing Check Valve.
    • A special type of Venting Valve is attached, which includes Servo Cylinder and Solenoid Valve.
    • Servo Cylinder (KSC) is the piston type device assuring the durability and operates softly by the inserted orifice.
    • Solenoid Valve is attached to the main body of Venting Valve. During the unloading process, an amount of the air is vented with the purpose of reducing the noise.
  • INSTALLATION

    It is installed at the suction flange of the Air-End either directly or via flange adaptor depending on the type of Air-End.

 
Capacity Control: Additionally, there is a need for Proportional Controller to monitor the capacity. The position of the KSC Control Disc within the range between full and 70% load should be partly closed in accordance with the relevant pressure at the Proportional Controller inlet.


Model KSV 40V KSV 65BS_1 KSV 85BS_1 KSV 120BS_1 KSV 160V
Applied Horse Power (HP) Less than 30 30 ~ 50 75 ~ 100 150 ~ 200 250 ~ 300
Temperature Range (°C) -20 ~ 100
Maximum Pressure (bar) 16
Internal Diameter (ID) 40 65 85 120 160
Remarks It can be manufactured upon the customer's request(specification) except the Solenoid and Venting valves. For more information, please contact to Overseas Sales Department.

All rights Reserved. Koryo Machinery Co., Ltd
2Ba-711, Sihwa Industrial Complex(Sihwa Gong Dan) 67, Gunjacheon-Ro 21beon-gil,
Siheung-si, Gyeonggi-do, 429-450 South Korea
Phone: +82-31-498-6387, 8               FAX: +82-31-498-6386